Let's talk rack gear!

[rologibson]

Globz. HAve fun setting your board to your specs.

Have you ever considered placing a wooden block below one pedal to raise it above the others. I did and it helps me on the switching thing between pedals.

[Glo®bz]

Originally Posted by rologibson

Globz. HAve fun setting your board to your specs.

Have you ever considered placing a wooden block below one pedal to raise it above the others. I did and it helps me on the switching thing between pedals.

I don't have enough to get that crazy... I'm putting final touches to the design. I'm at the stage where I'm accounting for wiring and the space plugs will need to make this work... looking good so far can't wait to be done so that I can share the 3d stuff, the actual pictures will come after with everything in the rack(rack stuff is already mounted in).

[JackButler]

ahhhhhhhhhhhhhhhhhhhhhhh

[Glo®bz]

Almost done... finishing the wah drawing tonight (most likely) after that I have to wait to get the actual blank panel to see what direction I have to take to angle it... I have 3 options I'm considering right now... but 2 could be overkill (and more expensive) or not if the panel is actually perfectly flat... didn't say in the eBay listing and couldn't see from the picture. Will know soon enough.

It's tons of fun designing this tho changes form the daytime design work!

[Glo®bz]

Ok quick preview of the 3D stuff.


Small things left to figure out for it to be final.
So I guess that's close enough right


For those wondering;

The blue one is an Empress ParaEq and the green one is going to be an homemade swticher to allow be to bypass each side of my Lexicon individually remotely.

[Glo®bz]

Ok had time to take some pictures of the rack...

The actual pedalboard is gonna get build as parts come in... untill then you have the 3D CAD jpg as a close enough preview above.